Contact a Toronto Building Customer Service counter to ask about the zoning on your property. 416-397-5330. You may call from 8:30 a.m. to 4:30 p.m., Monday to Friday. City Planning staff can answer general questions about Zoning By-law 569-2013 and about new zoning initiatives.
Amazingly, how do you read a zoning code in Toronto?
Additionally, how do I find local zoning laws? Where Are Zoning Laws and Ordinances Located? The best place to look for your local laws is at the office of your city or town government. The offices of the mayor, city attorney, or department of housing, are also a good place to start. Some public libraries may also have local ordinance materials.
Correspondingly, what is RT zoning in Toronto? a street which intersects a major street on the Policy Areas Overlay Map, and the lot is located, in whole or in part, within 80 metres of that intersection. A day nursery in the RT zone must comply with the specific use regulations in Section 150.45.
People ask also, what is FSI Toronto? Also known as the floor area ratio (FAR), FSI is the relationship between the total amount of usable floor area and the total area of the property on which it stands. … Local governments use the FSI of a building as a density measure: a higher ratio indicates a denser development.Established Grade: The established grade is the elevation at the bottom of the proposed excavation. The minimum yard setbacks for buildings and structures above Established Grade shall be as shown on Schedule “RM6(xxx)”.
How do I find the zone of my property?
Visit your local zoning office, city hall, or some other local planning board and get a copy of your local ordinance. In some areas, if you have a legal description of the property (name, address, tax map, and parcel number), you can call the zoning office or city hall, or even e-mail your request for information.
How do I get zoning clearance?
- Transfer Certificate of Title (One Certified Copy from ROD)
- Tax Declaration (One Photocopy)
- Tax Receipts or Tax Clearance (One Photocopy)
- Notarized Affidavit of Consent (if not owner of the lot) (One Copy)
What is c2 zone?
The C-2 General Commercial Zone is intended to permit a wide range of retail and commercial services, professional offices, and medical facilities.
What is M zoning in Ontario?
Within an Industrial “M1” Zone no person shall use any land, erect, alter, enlarge, use or maintain any building or structure for any use other than as permitted in subsection 2 of this Section and also in accordance with the regulations contained or referred to in subsections 3 and 4 of this Section.
What are the types of zoning?
- Residential Zoning. Residential zones can include:
- Commercial Zoning.
- Industrial Zoning.
- Agricultural Zoning.
- Rural Zoning.
- Combination Zoning.
- Historic Zoning.
- Aesthetic Zoning.
What is RT zoning in Ontario?
176.17 RT-1 RESIDENTIAL/TRANSITIONAL USE. This zoning district is primarily intended to provide an acceptable range of land uses and controls for the reuse of vacant school and institutional properties in residential neighborhoods. … The following residential uses: (1) Single-family detached dwellings.
What is R2 zoning in Ontario?
The R2 (Medium Density Residential) zoning district is established to allow for the development of a mix of single family dwellings, duplexes, townhouses, condominiums, garden apartments and other types of residential development at densities in the range of 11.1 to 16.0 dwellings per acre with an appropriate level of …
What is the minimum lot to build a house Toronto?
Lot Width: 5.4m (minimum requires is 3.5m) at the rear; Lot Depth: 32.7m (minimum is 5m between rear of existing house and start of laneway house); Zoning: R 0.6 (zoning density waived for 250km of laneways, avoids minor variance hearing);
What is RT zone?
A: The Research and Technology (RT) Zone is a new zoning classification that will be applied to two existing industrial areas in Huntington Beach. … This area contains industrial and research and technology uses and is directly adjacent to Boeing and C&D/Zodiac Aerospace.
Is basement included in FSI?
each. FSI, however, prohibits public amenities such as common area, parking area, interior open space, pipes and basement completely used for parking. These areas are excluded while calculating FSI.
Is garage included in gross floor area?
The area contained within the external walls of the building measured at each floor level (including any floor below the level of the ground), together with the area of each balcony in the building. The basis for calculating GFA may vary between owner groups and sometimes the GFA excludes the parking garage.
What is the meaning of floor space index?
The abbreviation stands for Floor a Space Index; also referred to as FAR (Floor Area Ratio). In simple terms, FSI is the maximum permissible floor area, that a builder can build on a particular plot/piece of land. FSI is the ratio of building floor covered area to area available on the land.
What is established grade line?
“Established grade” means, with reference to a building, structure or part thereof, the average elevation of the finished grade of the ground immediately surrounding such building or structure, and when used with reference to a street, means the elevation of the street, established by the Municipality or other …
How is lot coverage calculated in Toronto?
Lot Coverage: The percentage determined by dividing (a) the area of a lot covered by the total (in square feet) of: (1) the footprint of the main building; and (2) the footprints of accessory buildings (counting only buildings with footprints larger than one hundred fifty (150) square feet, or with two stories or more …
What is average natural grade?
Average Natural Grade is the average elevation of the ground level of the parcel surface as measured at the intersection of the minimum rear and front setback lines (or parcel lines if no setbacks are required) with the minimum side setback lines (or parcel lines if no setbacks are required) of the parcel.