How to find zoning for a property toronto?


Contact a Toronto Building Customer Service counter to ask about the zoning on your property. 416-397-5330. You may call from 8:30 a.m. to 4:30 p.m., Monday to Friday.

Quick Answer, how do you read a zoning code in Toronto?

Subsequently, how do I find local zoning laws? Where Are Zoning Laws and Ordinances Located? The best place to look for your local laws is at the office of your city or town government. The offices of the mayor, city attorney, or department of housing, are also a good place to start. Some public libraries may also have local ordinance materials.

Similarly, what is R1 zoning in Toronto? Lots zoned R1 in the Park Lane neighbourhood have a maximum building height of 8.0m and 2 storeys for a building with a flat roof, and 9.5m and 2 storeys for buildings with other roofs. … Setbacks for accessory buildings located in the side yard shall be not less than those required for the main building.

Best answer for this question, what is FSI Toronto? Also known as the floor area ratio (FAR), FSI is the relationship between the total amount of usable floor area and the total area of the property on which it stands. … Local governments use the FSI of a building as a density measure: a higher ratio indicates a denser development.Lot Frontage. means the horizontal distance between the side lot lines of a lot, or the projection of the side lot lines, measured along a straight line drawn perpendicular to the lot centreline at the required minimum front yard setback.

How do I find the zone of my property?

Visit your local zoning office, city hall, or some other local planning board and get a copy of your local ordinance. In some areas, if you have a legal description of the property (name, address, tax map, and parcel number), you can call the zoning office or city hall, or even e-mail your request for information.

How do I get zoning clearance?

  1. Transfer Certificate of Title (One Certified Copy from ROD)
  2. Tax Declaration (One Photocopy)
  3. Tax Receipts or Tax Clearance (One Photocopy)
  4. Notarized Affidavit of Consent (if not owner of the lot) (One Copy)

What is c2 zone?

The C-2 General Commercial Zone is intended to permit a wide range of retail and commercial services, professional offices, and medical facilities.

What is RT zoning in Toronto?

a street which intersects a major street on the Policy Areas Overlay Map, and the lot is located, in whole or in part, within 80 metres of that intersection. A day nursery in the RT zone must comply with the specific use regulations in Section 150.45.

What is M zoning in Ontario?

Within an Industrial “M1” Zone no person shall use any land, erect, alter, enlarge, use or maintain any building or structure for any use other than as permitted in subsection 2 of this Section and also in accordance with the regulations contained or referred to in subsections 3 and 4 of this Section.

What is R2 zoning in Ontario?

The R2 (Medium Density Residential) zoning district is established to allow for the development of a mix of single family dwellings, duplexes, townhouses, condominiums, garden apartments and other types of residential development at densities in the range of 11.1 to 16.0 dwellings per acre with an appropriate level of …

What is M2 zoning in Toronto?


How close can I build to my property line Toronto?

All accessory buildings in the side yard require a side yard setback of not less than the minimum required for the main building. 0.5m from the rear lot line but no closer than 7.5m from the opposite boundary of the lane. Overhang projections (i.e. soffits and eavestroughs) are required to be 0.15m from property lines.

Is basement included in FSI?

each. FSI, however, prohibits public amenities such as common area, parking area, interior open space, pipes and basement completely used for parking. These areas are excluded while calculating FSI.

Is garage part of GFA?

The area contained within the external walls of the building measured at each floor level (including any floor below the level of the ground), together with the area of each balcony in the building. The basis for calculating GFA may vary between owner groups and sometimes the GFA excludes the parking garage.

Does GFA include basement?

Generally, the gross floor area is the sum of the floor areas of the spaces within the building, including basements, mezzanine and intermediate-floored tiers, and penthouses with headroom height of 7.5 ft (2.2 meters) or greater.

How do I find my property lines in Toronto?

An Ontario Land Surveyor is the only person who can confirm property boundaries. If you wish to obtain a new survey of your property, contact a licensed Ontario Land Surveyor, many of which are listed in your local business directory or the internet under ‘Surveyors-Land’.

How do I change my zoning in Toronto?

If you wish to use, alter or develop your property in a way that does not conform with the Zoning By-law, you must apply for a site-specific amendment to the Zoning By-law. You can do this through either a Zoning By-law Amendment application (commonly called a rezoning) or a Minor Variance application.

How tall can a shed be in Toronto?

Other restrictions include a maximum height of 2.5 meters (about 8 feet) if the structure is less than 1.8 meters (about 6 feet) from the house. Otherwise, if you have a deeper lot, the maximum height allowed is 4 meters (about 13 feet).

What are the types of zoning?

  1. Residential Zoning. Residential zones can include:
  2. Commercial Zoning.
  3. Industrial Zoning.
  4. Agricultural Zoning.
  5. Rural Zoning.
  6. Combination Zoning.
  7. Historic Zoning.
  8. Aesthetic Zoning.

Back to top button