How to read toronto zoning bylaw?


Moreover, how do I find out the zoning of a property in Toronto? Contact a Toronto Building Customer Service counter to ask about the zoning on your property. 416-397-5330. You may call from 8:30 a.m. to 4:30 p.m., Monday to Friday. City Planning staff can answer general questions about Zoning By-law 569-2013 and about new zoning initiatives.

Subsequently, what is RM zoning in Toronto? In the RM zone, the rear main wall of a detached house or semi-detached house, not including a one storey extension that complies with regulation 10.80. 40.20(2), may be no more than 19.0 metres from the required minimum front yard setback.

You asked, what is M2 zoning in Toronto? HEAVY INDUSTRIAL ZONE (M2)

Also the question is, what is R2 zoning in Ontario? The R2 (Medium Density Residential) zoning district is established to allow for the development of a mix of single family dwellings, duplexes, townhouses, condominiums, garden apartments and other types of residential development at densities in the range of 11.1 to 16.0 dwellings per acre with an appropriate level of …Where Are Zoning Laws and Ordinances Located? The best place to look for your local laws is at the office of your city or town government. The offices of the mayor, city attorney, or department of housing, are also a good place to start. Some public libraries may also have local ordinance materials.

How do you read a Toronto zone label?

How close can an air conditioner be to property line Toronto?

To comply with the zoning by-law, an air conditioner must be located so that there are at least 1.2 metres between the outer edge of the air conditioner and the property line.

How do I call 311 from outside Toronto?

If you are outside of the City of Toronto and want to reach a 311 customer service representative, please call 416-392-CITY (2489).

What is M3 zoning in Ontario?

The M3 Zone allows for a range of industrial uses including manufacturing, research and development and limited office which help foster the development of a prestige Employment Area.

How close to the property line Can a shed be?

You typically can’t build a shed within 10 feet of the rear property line and 15 feet from a side property line. There should be sufficient room between your shed and your neighbor’s yard.

How high can a shed be in Toronto?

Other restrictions include a maximum height of 2.5 meters (about 8 feet) if the structure is less than 1.8 meters (about 6 feet) from the house. Otherwise, if you have a deeper lot, the maximum height allowed is 4 meters (about 13 feet).

How do I find the zone of my property?

Visit your local zoning office, city hall, or some other local planning board and get a copy of your local ordinance. In some areas, if you have a legal description of the property (name, address, tax map, and parcel number), you can call the zoning office or city hall, or even e-mail your request for information.

What is M zoning in Ontario?

Within an Industrial “M1” Zone no person shall use any land, erect, alter, enlarge, use or maintain any building or structure for any use other than as permitted in subsection 2 of this Section and also in accordance with the regulations contained or referred to in subsections 3 and 4 of this Section.

How do I find my house code?

Beyond building to code, you need to obtain permits To obtain a permit, you or your contractor submits a plan to the local government. Once the plan is approved, you’ll be issued a permit, and you can get to work. Later on, an inspector will check the work to confirm that it meets the plan and is up to code.

What does Zone R1 mean?

The R1 Zoning is one of the most commonly found zoning types in residential neighborhoods. This particular classification allows single-family homes to be built, with one unit intended per lot.

What does R3 zoning mean in Ontario?

The R3 Zone provides for and regulates low to low-medium density residential development permitting single detached dwellings, semi-detached dwellings, duplex dwellings, triplex dwellings, fourplex dwellings; and allows for the conversion of an existing dwelling.

What does Zone R 5 mean?

“The R-5, Medium High Density Multiple-Family Residential District is intended to provide areas for multiple-family dwellings at densities ranging up to medium high.” The following is a list of the Permitted Uses, Special Uses, Planned Unit Development Uses and Conditional Uses in the R-5 District.

What is c2 zone?

The C-2 General Commercial Zone is intended to permit a wide range of retail and commercial services, professional offices, and medical facilities.

Can I run a small business out of my home?

You can start and run your small business from the comfort of your own home. Running a business from home allows you to profit without dealing with the high overhead typical of traditional business settings. You also avoid long commutes. Running a successful small business from home isn’t always easy, however.

What document usually guides most local zoning in VA?

The comprehensive plan is the policy document that guides development in an area. The zoning ordinance, typically comprising both text and a zoning map, includes land use regulations that classify property into various zones, restrict the use of land, impose development standards, and include procedural requirements.

Back to top button