Contents
HEAVY INDUSTRIAL ZONE (M2)
You asked, how do I find out the zoning of a property in Toronto? Contact a Toronto Building Customer Service counter to ask about the zoning on your property. 416-397-5330. You may call from 8:30 a.m. to 4:30 p.m., Monday to Friday. City Planning staff can answer general questions about Zoning By-law 569-2013 and about new zoning initiatives.
Moreover, how do you read zoning in Toronto?
Frequent question, how close to the property line can I build a shed in Toronto? All accessory buildings in the side yard require a side yard setback of not less than the minimum required for the main building. 0.5m from the rear lot line but no closer than 7.5m from the opposite boundary of the lane. Overhang projections (i.e. soffits and eavestroughs) are required to be 0.15m from property lines.
Correspondingly, how big of a shed can I build without a permit in Toronto? Fortunately in Toronto, any structure less than 108 square feet does not require a building permit. This means you can build your own accessory structure such as a shed, treehouse, or greenhouse, right in your own backyard.a street which intersects a major street on the Policy Areas Overlay Map, and the lot is located, in whole or in part, within 80 metres of that intersection. A day nursery in the RT zone must comply with the specific use regulations in Section 150.45.
What is lot frontage Toronto?
Lot Frontage. means the horizontal distance between the side lot lines of a lot, or the projection of the side lot lines, measured along a straight line drawn perpendicular to the lot centreline at the required minimum front yard setback.
What is FSI Toronto?
Also known as the floor area ratio (FAR), FSI is the relationship between the total amount of usable floor area and the total area of the property on which it stands. … Local governments use the FSI of a building as a density measure: a higher ratio indicates a denser development.
What is lot frontage mean?
Related Definitions LOT FRONTAGE means the horizontal distance between the side lot lines, measured perpendicularly from a line joining the middle of the front and rear lot lines and at a point thereon, a distance equal to the minimum front yard depth required by this by-law.
Do I need a permit to build a fence in Toronto?
sets standards for fences in Toronto and includes rules for fence height, material, and structure. You will need to obtain an approved Zoning Certificate and a Pool Fence Enclosure Permit to install a swimming pool enclosure. …
How big of a house can I build on my lot in Toronto?
Every neighbourhood is different. A 10,000 square foot lot in downtown Toronto allows you to build 30000 ft^2 of residential space if it has a 3x FSR. Whereas a the same size lot in Oakville will only allow you to build a 3000 square foot single family home. You can feel forced into building on that specific theme.
What happens if you build a shed without a permit in Ontario?
An individual who is charged and found guilty of an offence under the Building Code Act, 1992 , such as building without a permit, can be fined up to $50,000 for a first offence and up to $100,000 for subsequent offences.
Do you need a permit to pour concrete in your backyard Ontario?
Is your planned concrete patio less than 30 inches above grade? If so, you’re in luck – you most likely will not need a building permit, although your concrete contractor might have to pull an excavation permit.
Do I need a permit to pave my driveway in Toronto?
Article content. Repaving a driveway anywhere in the city of Toronto will require a $129.45 permit if a new bylaw regulating streets and sidewalks is approved by city council.
How close to the property line can I put a shed?
You typically can’t build a shed within 10 feet of the rear property line and 15 feet from a side property line. There should be sufficient room between your shed and your neighbor’s yard. If there is any question, review your permit, check with your HOA, or contact your municipality office.
What is M2 zoning Ontario?
A waste disposal area as defined in addition to all other uses permitted in the General Industrial Zone (M2). b) Other Permitted Buildings and Structures i) buildings and structures for the uses permitted in subsection 14.3. 1 a); ii) accessory buildings and structures for the uses permitted in subsection 14.3. 1 a).
How do I find the zone of my property?
Visit your local zoning office, city hall, or some other local planning board and get a copy of your local ordinance. In some areas, if you have a legal description of the property (name, address, tax map, and parcel number), you can call the zoning office or city hall, or even e-mail your request for information.
What are the types of zoning?
The three major activities and uses that define zones are: residential, commerical and industrial.
What is RT zone?
A: The Research and Technology (RT) Zone is a new zoning classification that will be applied to two existing industrial areas in Huntington Beach. … This area contains industrial and research and technology uses and is directly adjacent to Boeing and C&D/Zodiac Aerospace.
How close can an air conditioner be to property line Toronto?
To comply with the zoning by-law, an air conditioner must be located so that there are at least 1.2 metres between the outer edge of the air conditioner and the property line.
What is maximum lot coverage?
Maximum Lot Coverage is computed as the total amount of impervious surface on the lot divided by the total lot area. Impervious surfaces on a lot include, but are not limited to, building driveways, garage, porches, patios, private walks, accessory building, and any other impervious surfaces constructed on the lots.
